|
|
|||||||
 |
|
|
Εργαλεία Θεμάτων | Τρόποι εμφάνισης |
|
#1
26-08-2009, 16:37
|
|||
|
|||
HALL SENSORS
διαβαζω σε ξενα φορουμς για ενα κοινο προβλημα το οποιο εχω αντιμετωπισει και εγω ΡΩΤΑΩ ΛΟΙΠΟΝ ποσοι απο εμας εχουμε αλλαξει HALL SENSORS????
και τι συμπτωματα ειχατε??? 
|
|
#2
26-08-2009, 18:02
|
|||
|
|||
Απάντηση: HALL SENSORS
 ... τι ναι αυτο βρε παίδες!...πρωτη φορα το ακουω!
|
|
#3
26-08-2009, 19:31
|
|||
|
|||
|
Απάντηση: HALL SENSORS
Απόσπασμα:
Μπορείτε να δείτε κι αυτό το pdf
|
|
#4
26-08-2009, 22:17
|
|||
|
|||
|
Απάντηση: HALL SENSORS
Απόσπασμα:
το κόστος του να αλλάξεις τους σένσορες μόνο από τη BOSCH είναι περίπου στα 100€ το έχει κάνει φίλος μου και είναι μια χαρά το μηχανάκι του μόνο που θέλει μεγάλη ακρίβεια και προσοχή στο περτσίνομα
|
|
#6
27-08-2009, 11:33
|
|||
|
|||
|
Απάντηση: HALL SENSORS
Απόσπασμα:
|
|
#7
27-08-2009, 19:27
|
|||
|
|||
|
Απάντηση: HALL SENSORS
Για τους Αγγλομαθείς
 :Hall effect sensor From Wikipedia, the free encyclopedia Jump to: navigation, search  It has been suggested that this article or section be merged with Hall probe. (Discuss)  The magnetic piston (1) in this pneumatic cylinder will cause the Hall effect sensors (2 and 3) mounted on its outer wall to activate when it is fully retracted or extended.  Clutch with Hall Effect sensor. A Hall effect sensor is a transducer that varies its output voltage in response to changes in magnetic field. Hall sensors are used for proximity switching, positioning, speed detection, and current sensing applications. In its simplest form, the sensor operates as an analogue transducer, directly returning a voltage. With a known magnetic field, its distance from the Hall plate can be determined. Using groups of sensors, the relative position of the magnet can be deduced. Electricity carried through a conductor will produce a magnetic field that varies with current, and a Hall sensor can be used to measure the current without interrupting the circuit. Typically, the sensor is integrated with a wound core or permanent magnet that surrounds the conductor to be measured. Frequently, a Hall sensor is combined with circuitry that allows the device to act in a digital (on/off) mode, and may be called a switch in this configuration. Commonly seen in industrial applications such as the pictured pneumatic cylinder, they are also used in consumer equipment; for example some computer printers use them to detect missing paper and open covers. When high reliability is required, they are used in keyboards.  Hall sensors are commonly used to time the speed of wheels and shafts, such as for internal combustion engine ignition timing or tachometers. They are used in brushless DC electric motors to detect the position of the permanent magnet. In the pictured wheel carrying two equally spaced magnets, the voltage from the sensor will peak twice for each revolution. This arrangement is commonly used to regulate the speed of disc drives. [edit] Hall Effect Sensor Interface Hall effect sensor may require analog circuitry to be interfaced to microprocessors. These interfaces may include input diagnostics, fault protection for transient conditions and short/open circuit detection. It may also provide and monitor the current to the hall effect sensor itself. There are precision IC products available to handle these features. Example for Hall Effect Interface IC is MAX9921 from Maxim Integrated Products.
|
|
#8
27-08-2009, 22:39
|
|||
|
|||
|
Απάντηση: HALL SENSORS
Απόσπασμα:
 
|
|
#9
28-08-2009, 11:43
|
|||
|
|||
|
Απάντηση: HALL SENSORS
Απόσπασμα:
|
|
| Εργαλεία Θεμάτων | |
| Τρόποι εμφάνισης | |
|
|
Αλλαγή σε γραμμικό τρόπο
